The deck hatches are to be mounted on a flat surface. Therefore I had to make frames with a curved edge on the one side and a flat edge on the other. I made a jig using a long batten with a length similar to the radius of the deck crown to cut the curved sides of the timber with a router.
a Didi 34 being built by her owner in his spare time. This blog gives a chronological history of the building process.
Jahazi
Introduction
"If you want to build a ship, don't drum up people to collect wood and don't assign them tasks and work, but rather teach them to long for the endless immensity of the sea"
Antoine de Saint-Exupery
No comments:
Post a Comment